Upgrading your computer RAM is a or even the most cost-effective methods for giving an enormous boost for your computer’s performance. Upgrading your RAM can be achieved in 2 ways. First, you are able to replace your old thumb drive with one which has a bigger capacity. Second, you should use the additional RAM slots in your motherboard to include new memory sticks.
Before you change your RAM, however, you should know the kind of RAM that the computer uses. You will find three kinds of RAM currently available. The earliest type may be the DDR SDRAM or double data rate synchronous dynamic RAM. The DDR SDRAM has largely been phased by the more prevalent DDR2 SDRAM or double data rate, second generation SDRAM. The most recent kind of RAM may be the third generation DDR3 SDRAM. DDR3 SDRAM has faster bandwith speeds than DDR2 SDRAM and DDR SDRAM, with DDR SDRAM to be the slowest.
Some motherboards are only able to support one sort of RAM. Thus, always seek information prior to going ahead and purchase new RAM modules. Certain RAM architecture can also be restricted to some motherboard. To make certain you have the right RAM, you are able to remove your RAM stick and offer it towards the store when buying.
Make certain your computer is switched off and unplugged in the wall plug whenever you remove your RAM module. This can minimize electrical shocks for you and your internal computer components. Additionally, don’t switch on your computer without a minumum of one RAM module connected to the motherboard. Your computer won’t boot with no RAM.